Giới thiệu Mainboard Supermicro X10DAL-i

CPU hỗ trợ

CPU:
Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s

Cores / Cache: Up to 22 cores † / Up to 55MB† cache

Note: † BIOS version 2.0 or above is required

Note: ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

RAM hỗ trợ
Memory Capacity: 256GB ECC RDIMM, DDR4-2400MHz, in 8 DIMM slotsUp to 1TB ECC 3DS LRDIMM

Memory Type: 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes: RDIMM: 4GB, 8GB, 16GB, 32GB
LRDIMM: 32GB, 64GB
3DS LRDIMM: 128GB

Memory Voltage: 1.2V

Error Detection: Corrects single-bit errors

On-Board Devices

Chipset: Intel® C612

SATA: Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10

SCU SATA: SATA3 (6Gbps); RAID 0, 1, 5, 10

Network Controllers: Dual LAN with Intel® i210 Gigabit Ethernet Controller

Audio: 7.1 HD Audio

Đầu vào / Đầu ra
SATA: 10 SATA3 (6Gbps) port

LAN: 2 RJ45 Gigabit Ethernet LAN ports

USB:

3 USB 2.0 ports (2 headers, 1 Type A)
6 USB 3.0 ports (4 rear + 2 headers)

Serial Port / Header: 1 COM Port (1 header)

TPM: 1 TPM Header

Khe mở rộng

2 PCI-E 3.0 x16 (in x16 slot)
1 PCI-E 3.0 x8 (in x16 slot)
1 PCI-E 3.0 x4 (in x8 slot)
1 PCI-E 2.0 x4 (in x8 slot)
System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software: SuperDoctor® 5, Watchdog

Power Configurations:
ACPI Power Management
Power-on mode for AC power recovery

Theo dõi sức khỏe PC
Voltage: +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5 Phase-switching voltage regulator, VBAT

FAN: 7x 4-pin fan headers (up to 7 fans), 7 fans with tachometer status monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control

Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI

LED: CPU / System Overheat LED

Other Features: Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC

Môi trường hoạt động
Operating Temperature Range: 10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range: -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range: 8% - 90% (non-condensing)

Non-Operating Relative Humidity Range: 5% - 95% (non-condensing)
Giá KERMIT